CIロゴ

english 仕切り線 Japanese Site

strutbrace_caption

Even the most powerful car can not perform well at a high level without sufficient body rigidity. The Beatrush Strut Brace enhances the body rigidity and inhibits warping, which makes the suspension movement smooth.

ROADSTER  [ NCEC ]
INTEGRA Type-R  [ DC5 ]

TOYOTA Model
(Year)
Front / Rear Parts Code PRICE
without tax
Note
86 ZN6
(12.2~ )
Front/Type1 S86400-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
Front/Type2 S86400-FCA ¥18,000 φ32mm-Aluminum shaft and Steel-bracket.
Rear S86400-RTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
ARISTO JZS161
(97.8~04.12)
Front S81312-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
Weight : 1.4kg
Rear S81312-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
Weight : 1.7kg
ALTEZZA SXE10
(98.10~05.3)
Front S81510-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
Weight : 1.3kg
Rear S81510-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
Weight : 1.7kg
CALDINA ST246W
(02.9~07.6)
Front S81422-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
Rear S81422-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
CELICA ZZT231
(99.9~06.4)
Front S81214-FTA ¥15,000 Aluminum-oval shaft and Aluminum-bracket.
Weight : 1.8kg
Rear S81214-RTA ¥25,000 ※ It is necessary to process rear trim.
3-point support type.
Aluminum-oval shaft and Steel-bracket.
Weight : 4.1kg
ST202
(93.10~99.9)
Front S81211-FTA ¥25,000 ※ It is necessary to process rear trim.
3-point support type.
Aluminum-oval shaft and Steel-bracket.
Rear S81212-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
CELICA
GT-Four
ST205
(94.2~99.9)
Front S81212-FTA ¥25,000 3-point support type.
Aluminum-oval shaft and Steel-bracket.
Rear S81212-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
COROLLA
LEVIN・TRUENO
AE111
(95.5~00.8)
Front S8123-FTA ¥18,000 φ38mm-Aluminum shaft and Steel-bracket.
AE86
(83.5~87.4)
Front S8116-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
Weight : 1.8kg
COROLLA
RUNX・ALEX
ZZE123
(01.1~06.9)
Front S81601-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
Rear S81601-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
CROWN
FIELDER
ZZE123G
(00.8~06.9)
Front S81601-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
COROLLA
ATHLETE
GRS182
(03.12~04.5)
Front S81302-FTA ¥18,000 ※ Not for 2004.6~ model.
※ It is necessary to detach engine cover.
Aluminum-oval shaft and Steel-bracket.
ist NCP61
(02.5~07.1 )
Front S81010-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
MR-S ZZW30
(99.10~07.7)
Front S81202-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
Weight : 1.7kg
Rear S81202-RTA ¥24,000 3-point support type.
Aluminum-oval shaft and Aluminum-bracket.
Weight : 2.2kg
PASSO KGC10
(04.6~09.1)
Front S81030-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
PRIUSα ZVW40
ZVW41
(11.5~ )
Front S81703-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
PRIUS ZVW30
(09.5~ )
Front S81703-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
VITZ NCP91
(05.2~10.12)
Front S81014-FTA ¥16,500 Aluminum-oval shaft and Steel-bracket.
Rear S81014-RTA ¥25,000 Aluminum-oval shaft and Steel-bracket.
NCP10
NCP13
(99.1~02.12)
Front S81010-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
NISSAN Model
(Year)
Front / Rear Parts Code PRICE
without tax
Note
CUBE
CUBE3
Z12
(08.11~ )
Front S82056-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
Z11
#GZ11
(02.10~08.10)
Front S82054-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
AZ10
(98.2~02.9)
Front S82052-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
NOTE E11
(05.1~12.6)
Front S82030-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
SILVIA S15
(99.1~02.8)
Front S82152-FTA ¥18,000 Aluminum-oval shaft and Steel-bracket.
Weight : 1.3kg
S14
(93.10~99.1)
Front S82152-FTA ¥18,000 Aluminum-oval shaft and Steel-bracket.
Weight : 1.3kg
X-TRAIL NT31
DNT31
(07.8~13.8)
Front S82612-FTA ¥22,000 ※ Not for 2500cc NA
Aluminum-oval shaft and Steel-bracket.
TNT31
(07.8~13.8)
Front S82614-FTA ¥22,000 ※ Only for 2500cc NA
Aluminum-oval shaft and Steel-bracket.
MITSUBISHI Model
(Year)
Front / Rear Parts Code PRICE
without tax
Note
COLT Z23A
Z27AG
(02.11~12.6)
Front S83232-FTA ¥18,000 Aluminum-oval shaft and Steel-bracket.
COLT PULS Z23W
Z27WG
(04.10~12.6)
Front S83232-FTA ¥18,000 Aluminum-oval shaft and Steel-bracket.
GALANT VR-4 E39A
E38A
(87.9~92.5)
Front S8517-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
Rear S8517-RT ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
LANCER Evolution
X
CZ4A
(07.10~ )
Front S83060-FTA ¥22,000 3-point support type.
Aluminum-oval shaft and Steel-bracket.
Rear S83060-RTA ¥22,000 Aluminum-oval shaft and Steel-bracket.
LANCER Evolution
WAGON
CT9W
(05.9~07.9)
Front S83056-FTA ¥23,000 3-point support type.
Aluminum-oval shaft and Steel-bracket.
Weight : 4.0kg
S83055-FTA2 ¥18,000 φ38mm-Aluminum shaft and Steel-bracket.
Weight : 2.5kg
Rear S83056-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
Weight : 1.7kg
LANCER Evolution
VII・VIII・IX
CT9A
(01.2~07.9)
Front S83056-FTA ¥23,000 3-point support type.
Aluminum-oval shaft and Steel-bracket.
Weight : 4.0kg
S83055-FTA2 ¥18,000 φ38mm-Aluminum shaft and Steel-bracket.
Weight : 2.5kg
Rear S83056-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
Weight : 1.7kg
A83055-RT ¥15,000 ※ It is necessary to process rear trim.
The shaft and bracket are made of steel as one body painted with a gold finish
Weight : 3.2kg
LANCER Evolution
IV・V・VI
CN9A
CP9A
(96.8~01.1)
Front S83051-FTA ¥23,000 3-point support type.
The shaft and bracket are made of aluminum as one body painted with a gold finish
A83051-FT2 ¥20,000 3-point support type.
The shaft and bracket are made of steel as one body painted with a gold finish
Rear S83051-RTA ¥20,000 ※ It is necessary to process rear trim.
The shaft and bracket are made of aluminum as one body painted with a gold finish
S83051-RTA2 ¥23,000 ※ It is necessary to process rear trim.
3-point support type.
The shaft and bracket are made of aluminum as one body painted with a gold finish
A83051-RT ¥15,000 ※ It is necessary to process rear trim.
The shaft and bracket are made of steel as one body painted with a gold finish
LANCER Evolution
I・II・III
CD9A
CE9A
(92.10~95.10)
Front S8509-FTA ¥18,000 Aluminum-shaft and Aluminum-bracket.
A8509-FT ¥15,000 Steel-shaft and Steel-bracket.
Rear S8508-RTA ¥18,000 ※ It is necessary to process rear trim.
Steel-shaft and Steel-bracket.
A8508-RT ¥15,000 ※ It is necessary to process rear trim.
Steel-shaft and Steel-bracket.
LANCER
1800 4WD
CD5A
(91.7~93.11)
Rear S8508-RTA ¥18,000 ※ It is necessary to process rear trim.
Aluminum-shaft and Aluminum-bracket.
A8508-RT ¥15,000 ※ It is necessary to process rear trim.
Steel-shaft and Steel-bracket.
MIRAGE・
MIRAGE ASTI
CJ4A
(95.11~00.5)
Front S8520-FTA ¥18,000 Aluminum-shaft and Aluminum-bracket.
A8520-FT ¥15,000 Steel-shaft and Steel-bracket.
Rear S8508-RTA ¥18,000 ※ It is necessary to process rear trim.
Aluminum-shaft and Aluminum-bracket.
A8508-RT ¥15,000 ※ It is necessary to process rear trim.
Steel-shaft and Steel-bracket.
CA4A
CC4A
(91.10~95.10)
Rear S8508-RTA ¥18,000 ※ It is necessary to process rear trim.
Aluminum-shaft and Aluminum-bracket.
A8508-RT ¥15,000 ※ It is necessary to process rear trim.
Steel-shaft and Steel-bracket.
HONDA Model
(Year)
Front / Rear Parts Code PRICE
without tax
Note
CIVIC EK9
EK4
(95.9~00.8)
Rear S84032-RTA ¥15,000 ※ It is necessary to process rear trim.
φ32mm-Aluminum shaft and Steel-bracket.
Weight : 1.7kg
FIT RS GK5
(13.09~ )
Front S84208-FTA ¥18,000 ※ PILLOWBALL TOP MOUNT needed for installation (S134208TM-FP)
φ32mm-Aluminum shaft and Steel-bracket.
Rear S84208-RTA ¥15,000 φ32mm-Aluminum shaft and Steel-bracket.
INTEGRA
Type-R
DC5
(01.7~06.4)
Front S84052-FTA ¥15,000 ※ Not for 2004.9~ model
Aluminum-oval shaft and Steel-bracket.
Weight : 1.5kg
DC2
(95.10~00.9)
Rear S84050-RTA ¥15,000 ※ It is necessary to process rear trim.
φ32mm-Aluminum shaft and Steel-bracket.
Weight : 1.6kg
S2000 AP1
(99.4~05.10)
Front S84060-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
Weight : 1.1kg
MAZDA Model
(Year)
Front / Rear Parts Code PRICE
without tax
Note
ATENZA GJ2FP
(12.11~
Front S85502-FTA ¥18,000 Aluminum-oval shaft and Steel-bracket.
CX-5 KEEFW
KE5FW / AW
KE2FW / AW
(12.2~
Front S85402-FTA ¥18,000 Aluminum-oval shaft and Steel-bracket.
ROADSTER ND5RC
(15.5~ )
Front S85086-FTA ¥22,000 ※ For the vehicle not loading a tower bar of an option, a genuine air cowl panel (N244-56-35X) is needed.。
※ It's unconfirmed to install to the induction sound enhancer loading car.

3-point support type.
Aluminum-oval shaft and Aluminum-bracket.
Rear S85086-RTA ¥18,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Aluminum-bracket.
NCEC
(05.9~15.4 )
Front S85084-FTA ¥22,000 ※ Only for original tower bar installation car.
※ Not for induction sound enhancer installation car.
3-point support type.
Aluminum-oval shaft and Steel-bracket.
Weight : 2.9kg
Rear S85084-RTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
Weight : 2.3kg
NB8C
NB6C
(98.1~00.7)
Front S85082-FTA ¥18,000 ※ Not for ABS
※ Not for chassis No.200000~

※ With D.B.S.
Aluminum-oval shaft and Aluminum-bracket.
Rear S85082-RTA ¥15,000 ※ It is necessary to detach the cover of the fuel refueling hose or to cut and process it.
Aluminum-oval shaft and Steel-bracket.
NA8C
NA6CE
(89.7~97.12)
Front S85082-FTA ¥18,000 ※ With D.B.S.
Aluminum-oval shaft and Aluminum-bracket.
Rear S85081-RTA ¥16,000 ※ It is necessary to detach the cover of the fuel refueling hose or to cut and process it.
※ Attached: Spare tire movement bracket
Aluminum-oval shaft and Steel-bracket.
RX-7 FD3S
(91.12~02.8)
Front S85212-FTA ¥22,000 ※ With D.B.S.
Aluminum-oval shaft and Steel-bracket.
Rear S85212-RTA ¥18,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
RX-8 SE3P
(03.4~12.6)
Front S85310-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
Rear-UP S85310-RTAU ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
Rear-LOW S85310-RTAL ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
SUBARU Model
(Year)
Front / Rear Parts Code PRICE
without tax
Note
BRZ ZC6
(12.2~ )
Front/Type1 S86400-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
Front/Type2 S86400-FCA ¥18,000 φ32mm-Aluminum shaft and Steel-bracket.
Rear S86400-RTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
IMPREZA GRB
GVB
(07.10~ )
Front S86020-FTA ¥20,000 φ38mm-Aluminum shaft and Aluminum-bracket.
S86103-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
Weight : 1.5kg
GDB
(00.8~07.9)
Front S86016-FTA ¥18,000 φ38mm-Aluminum shaft and Aluminum-bracket.
Weight : 2.3kg
Rear S86016-RTA ¥18,000 φ38mm-Aluminum shaft and Steel-bracket.
※ I / C water spray tank installation car can not be installed.
Weight : 2.1kg
Trunk bar S86016-RTB ¥36,000 ※ Beatrush Rear tower bar is necessary to install this.(S86016-RTA)
Weight : 3.4kg
Rear strut brace
& Trunk bar set
S86016-RTBS ¥48,000 Rear strut brace & Trunk bar Set
GC8
(92.11~00.8)
Front S86010-FTA ¥20,000 The shaft and bracket are made of aluminum as one body painted with a gold finish
Weight : 1.1kg
A8660-FT ¥15,000 The shaft and bracket are made of steel as one body painted with a gold finish
Weight : 2.1kg
Rear S86010-RTA ¥18,000 Aluminum-shaft and Aluminum-bracket.
A8660-RT ¥15,000 Steel-shaft and Steel-bracket.
FORESTER SJG
(12.11~
Front S86205-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
Rear S86205-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
SJ5
(12.11~
Front S86205-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
Rear S86205-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
SH5
(07.12~12.10)
Front S86103-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
Weight : 1.5kg
SG9
(05.12~07.11)
Front S86016-FTA ¥18,000 φ38mm-Aluminum shaft and Aluminum-bracket.
Weight : 2.3kg
Rear S86203-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
SG5
(02.2~07.11)
Front S86203-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
Rear S86203-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
SF5
(97.2~02.1)
Front S86202-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
Rear S86203-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
LEGACY BLE
BPE
(03.5~09.4)
Front S86103-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
Weight : 1.5kg
Rear S86103-RTA ¥15,000 ※ It is necessary to process rear Sub-trunk.
Aluminum-oval shaft and Steel-bracket.
Weight : 1.4kg
BL5
BP5
(03.5~09.4)
Front S86103-FTA ¥18,000 Aluminum-oval shaft and Aluminum-bracket.
Weight : 1.5kg
Rear S86103-RTA ¥15,000 ※ It is necessary to process rear Sub-trunk.
Aluminum-oval shaft and Steel-bracket.
Weight : 1.4kg
BE5
BH5
(98.6~03.5)
Front S86102-FTA ¥18,000 ※ Only 2.0L TURBO car
Aluminum-oval shaft and Aluminum-bracket.
Rear S86102-RTA ¥15,000 ※ It is necessary to process rear Sub-trunk.
Aluminum-oval shaft and Steel-bracket.
Weight : 1.4kg
BD5
BG5
(93.10~98.5)
Front S86202-FTA ¥18,000 ※ Only 2.0L TURBO car
Aluminum-oval shaft and Aluminum-bracket.
Rear S86203-RTA ¥15,000 ※ Only WAGON car
※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
Weight : 1.4kg
LEVORG VMG
(14.06~
Rear S86024-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
WRX STi VAB
(14.08~
Front S86024-FTA ¥20,000 φ38mm-Aluminum shaft and Aluminum-bracket.
Rear S86024-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
SUZUKI Model
(Year)
Front / Rear Parts Code PRICE
without tax
Note
ALTO
TURBO RS
HA36S
(15.04~
Front S88504-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
Weight : 1.6 kg ( Std : 2.1 kg )
ALTO WORKS HA36S
(16.01~
Front S88504-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
Weight : 1.6 kg ( Std : 2.1 kg )
SWIFT sport ZC32S
(11.12~
Front S88044-FTA ¥18,000 ※ PILLOWBALL TOP MOUNT needed for installation (S133044TM-FP)
φ32mm-Aluminum shaft and Steel-bracket.
ZC31S
(07.5~10.7)
Front S88041-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
Rear S88041-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
SWIFT ZC71S
(07.5~10.7)
Front S88041-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
Rear S88041-RTA ¥15,000 ※ It is necessary to process rear trim.
Aluminum-oval shaft and Steel-bracket.
DAIHATSU Model
(Year)
Front / Rear Parts Code PRICE
without tax
Note
BOON X4 M312S
(06.3~09.12)
Front S81030-FTA ¥15,000 Aluminum-oval shaft and Steel-bracket.
IMPORT Model
(Year)
Front / Rear Parts Code PRICE
without tax
Note
MG MG-B   Front C80011-FTA ¥18,000 Aluminum-oval shaft and Steel-bracket.